Interface Group Configuration - ZyXEL Communications Nebula LTE3301-PLUS User Manual

You can use this screen to create new user-defined interface groups or modify existing ones. Interfaces
that do not belong to any user-defined group always belong to the default group.
Click Network Setting > Interface Grouping to open the following screen.
Figure 124 Network Setting > Interface Grouping
The following table describes the fields in this screen.
Table 75 Network Setting > Interface Grouping
LABEL
Add New
Interface Group
Group Name
WAN Interface
LAN Interfaces
Criteria
Modify
Add

14.2.1 Interface Group Configuration

Click the Add New Interface Group button in the Interface Grouping screen to open the following
screen. Use this screen to create a new interface group. If you want to automatically add LAN clients to
a new group, use filtering criteria.
Note: An interface can belong to only one group at a time.
Note: After configuring a vendor ID, reboot the client device attached to the Zyxel Device to
obtain an appropriate IP address.
Note: You can have up to 15 filter criteria.
Chapter 14 Interface Grouping
DESCRIPTION
Click this button to create a new interface group.
This shows the descriptive name of the group.
This shows the WAN interfaces in the group.
This shows the LAN interfaces in the group.
This shows the filtering criteria for the group.
Click the Edit icon to modify an existing Interface group setting or click the Delete icon to
remove the Interface group.
Click this button to create a new group.
Nebula Mobile Router User's Guide
206