ZyXEL Communications CellPipe 7130 RG User Manual page 93

Table 8 Status Screen
LABEL
WPS Status
WDS Status
AP Information
ESSID
Status
Security
System Status
System
Uptime
Current
Date/Time
System
Mode
CPU Usage
Memory
Usage
Interface Status
Interface
CellPipe 7130 RG User's Guide
DESCRIPTION
This field displays the status of WPS (Wi-Fi Protected Setup). Click this
to go to the screen where you can change it.
This field displays
• AP when WDS is disabled.
• Bridge when the CellPipe 7130 RG functions as a wireless network
bridge only to use WDS (Wireless Distribution System) to establish
wireless links with other APs.
• AP+Bridge when WDS is enabled and the CellPipe 7130 RG acts as
a bridge and access point simultaneously.
Click this to go to the screen where you can change it
Information displays for each AP profile you activate on the CellPipe
7130 RG.
This is the descriptive name used to identify the CellPipe 7130 RG in
this wireless network. Click this to go to the screen where you can
change it.
This shows the current status of the wireless network.
This shows the level of wireless security the CellPipe 7130 RG is using in
this wireless network.
This field displays how long the CellPipe 7130 RG has been running
since it last started up. The CellPipe 7130 RG starts up when you plug it
in, when you restart it (Maintenance > Tools > Restart), or when
you reset it (see Section 1.7 on page
This field displays the current date and time in the CellPipe 7130 RG.
You can change this in Maintenance > System > Time Setting.
This displays whether the CellPipe 7130 RG is functioning as a router or
a bridge.
This field displays what percentage of the CellPipe 7130 RG's processing
ability is currently used. When this percentage is close to 100%, the
CellPipe 7130 RG is running at full load, and the throughput is not going
to improve anymore. If you want some applications to have more
throughput, you should turn off other applications (for example, using
QoS; see Chapter 16 on page
This field displays what percentage of the CellPipe 7130 RG's memory is
currently used. Usually, this percentage should not increase much. If
memory usage does get close to 100%, the CellPipe 7130 RG is
probably becoming unstable, and you should restart the device. See
Section 24.4 on page 280, or turn off the device (unplug the power) for
a few seconds.
This column displays each interface the CellPipe 7130 RG has.
Chapter 4 Status Screens
28).
219).
93