ZyXEL Communications CellPipe 7130 RG User Manual page 25

Note: Use an 8-wire Ethernet cable for Gigabit connections. Using a 4-wire Ethernet
cable limits your connection to 100 Mbps. Note that the connection speed also
depends on what the Ethernet device at the other end can support.
HPNA: Use a coaxial cable to connect to a coaxial outlet and relay Internet traffic
3
throughout your house through coaxial cabling.
USB 2.0: Connect a USB (version 2.0 or lower) memory stick or a USB hard drive
4
for file sharing. The CellPipe 7130 RG automatically detects the USB device. Use
a USB extension cable if the stick is too big to fit.
Use the power adaptor provided with your CellPipe 7130 RG to connect an
5
appropriate power source to this socket.
Push the power button to the on position.
6
CellPipe 7130 RG User's Guide
Chapter 1 Introducing the CellPipe 7130 RG
25