Technical Reference - ZyXEL Communications CellPipe 7130 RG User Manual

Table 27 Network > WAN > Services > Add/Edit - Configuration Summary
LABEL
NAT
Full Cone NAT
Firewall
IGMP Multicast
Quality Of
Service
Back
Apply/Save

5.7 Technical Reference

The following section contains additional technical information about the CellPipe
7130 RG features described in this chapter.
Encapsulation
Be sure to use the encapsulation method required by your ISP. The CellPipe 7130
RG can work in bridge mode or routing mode. When the CellPipe 7130 RG is in
routing mode, it supports the following methods.
IP over Ethernet
IP over Ethernet (IPoE) is an alternative to PPPoE. IP packets are being delivered
across an Ethernet network, without using PPP encapsulation. They are routed
between the Ethernet interface and the WAN interface and then formatted so that
they can be understood in a bridged environment. For instance, it encapsulates
routed Ethernet frames into bridged Ethernet cells.
PPP over Ethernet
Point-to-Point Protocol over Ethernet (PPPoE) provides access control and billing
functionality in a manner similar to dial-up services using PPP. PPPoE is an IETF
standard (RFC 2516) specifying how a personal computer (PC) interacts with a
broadband modem (DSL, cable, wireless, etc.) connection.
For the service provider, PPPoE offers an access and authentication method that
works with existing access control systems (for example RADIUS).
CellPipe 7130 RG User's Guide
DESCRIPTION
This shows whether NAT is active or not for this connection.
This shows whether full cone NAT is active or not for this connection.
This shows whether Firewall is active or not for this connection.
This shows whether IGMP multicasting is active or not for this
connection.
This shows whether QoS is active or not for this connection.
Click this button to return to the previous screen.
Click this button to save your changes.
Chapter 5 WAN Setup
123