Quality Of Service (Qos) Screen; Wps Screen - ZyXEL Communications LTE3301-M209 User Manual

7.7 Quality of Service (QoS) Screen

The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level.
Click Network > Wireless LAN > QoS. The following screen appears.
Figure 45 Network > Wireless LAN > QoS
The following table describes the labels in this screen.
Table 28 Network > Wireless LAN > QoS
LABEL
WMM QoS
Apply
Cancel

7.8 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN > WPS.
Note: With WPS, wireless clients can only connect to the wireless network using the first SSID on
the Zyxel Device.
Chapter 7 Wireless LAN
DESCRIPTION
Select Enable to have the Zyxel Device automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes them
run more smoothly.
This field is not configurable and the Zyxel Device automatically enables WMM QoS if you
select 802.11n, 802.11gn or 802.11bgn in the Wireless LAN > General screen.
Click Apply to save your changes to the Zyxel Device.
Click Cancel to reload the previous configuration for this screen.
LTE3301-M209 User's Guide
75