Usb 2.0 Connectors (Lan/Usb1, Lan/Usb2); Vga Connector (Vga1); Jumper Settings; Table 7-20: Usb 2.0 Connectors (Lan/Usb1, Lan/Usb2) Pinouts - IEI Technology DRPC-100 User Manual

DRPC-100 Embedded System

7.3.7 USB 2.0 Connectors (LAN/USB1, LAN/USB2)

PIN NO. DESCRIPTION
1 VCC
2 DATA-
3 DATA+
4 GROUND

Table 7-20: USB 2.0 Connectors (LAN/USB1, LAN/USB2) Pinouts

7.3.8 VGA Connector (VGA1)

PIN NO. DESCRIPTION
1 RED
3 BLUE
5 GND
7 GND
9 VCC
11 NC
13 HSYNC
15 DDCCLK

Table 7-21: VGA Connector (VGA1) Pinouts

7.4 Jumper Settings

The JP3 and JP4 jumpers are preconfigured for the DRPC-100. Users should not change
these jumpers. It is only for reference.
Jumper Name
Clear CMOS
CAN-bus 1 long wire transmitting
CAN-bus 2 long wire transmitting

Table 7-22: Jumpers

PIN NO. DESCRIPTION
10 VCC
11 DATA-
12 DATA+
13 GROUND
PIN NO. DESCRIPTION
2 GREEN
4 NC
6 GND
8 GND
10 GND
12 DDC DAT
14 VSYNC
Label Type
JP1 3-pin header
JP3 2-pin header
JP4 2-pin header
Page 91