Sata Power Connector (Sata_Pwr1); Spi Flash Connector (Spi1); External Interface Panel Connectors; Table 7-11: Sata Power Connector (Sata_Pwr1) Pinouts - IEI Technology DRPC-100 User Manual

7.2.10 SATA Power Connector (SATA_PWR1)

PIN NO. DESCRIPTION
1 5V (supports 1A)
2 GND

Table 7-11: SATA Power Connector (SATA_PWR1) Pinouts

7.2.11 SPI Flash Connector (SPI1)

PIN NO. DESCRIPTION
1
SPI_VCC
2
SPI_CS#
3
SPI_MISO
4
SPI_CLK
5
SPI_MOSI
6 GND

Table 7-12: SPI Flash Connector (SPI1) Pinouts

7.3 External Interface Panel Connectors

The table below lists the rear panel connectors on the DRPC-100 motherboard. Pinouts of
these connectors can be found in the following sections.
Connector
CAN-bus terminal block
Digital I/O terminal block
Power input terminal block
RJ-45 LAN and USB 2.0
connectors
Power button
Reset button
Page 88
DRPC-100 Embedded System
Type Label
2 x 3-pin terminal block CAN1
2 x 5-pin terminal block J1
3-pin terminal block DC_CN1
RJ-45, LAN/USB1,
USB 2.0 LAN/USB2
Push button PWR_BTN1
Push button RST_BTN1