Staff Training; Disposal Of The Installation - Meiko K-Tronic Operating Instructions Manual

Operating instructions dishwashing machine model K-Tronic
Datei:BA-K-tronic_MIKE_9626212_EN_2005-12-01.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Fault:
Formation of a significant
amount of foam in the
wash tank
13

Staff training

Only trained and instructed personnel are allowed to work on the dishwashing machine.
The skills required by the personnel for the installation's operation, maintain and repair
must be clearly established.
Any personnel undergoing training are only allowed to work on the dishwashing machine
installation under the supervision of an experienced person.
persons
Activity
Installation and assembly
Commissioning
Operation, use
Cleaning
Checking safety devices
Fault finding
Troubleshooting,
mechanical
Troubleshooting,
electrical
Maintenance
Repairs
Such training should be confirmed in writing.
14

Disposal of the installation

When you eventually dispose of the installation (dismantlement/scrapping), the parts and
their corresponding materials should preferably be re-used.
Here is a list of the materials that most frequently occur when dismantling:

Chrome-nickel-steel

Aluminium

Copper

Brass

Electrical and electronic parts

PP and other synthetic materials

Chrome-nickel steel
W e reserv e the right to change execution and construction !
Remedy
 Detergent for dish-washing by hand enters the wash
tank because of pre-cleaning the dishes
 Daily cleaning of the machine is carried out with
foaming cleansing agents which afterwards enter the
machine
 Improve pre-wash, as too much food residue is
entering the tanks Alternatively, empty wash tanks
between uses.
 Rinse water quantity too low
 Detergent or rinse aid product not suitable
 Temperatures too low < 40°C
Trained operating Trained
personnel company
tradesman



Trained company
tradesman or
installation engineer


 
 
 
 
 


 
9626212
31/44