Environmentally Acceptable Measures, Disposal Of The Installation; Documentation - Meiko EcoStar 545D-M Operating Instructions Manual

Operating instructions EcoStar 545 D-M
Maintenance procedures
10. Operation check of the complete machine
Check machine for correct interaction of all functions
11. Test run
Check results of test wash and rinse
Brief instruction for new personnel
Datei:1_EcoStar545D-M_9662798_Betriebsanleitung_EN_2009-05.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
19 Environmentally acceptable measures, Disposal of the
installation
Each discarded appliance is to be made immediately unserviceable - to avoid later acci-
dents.
•
Therefore, set the local main switch to „OFF" or switch off the local main fuse.
When you eventually dispose of the installation (dismantlement/scrapping), the parts and
their corresponding materials should preferably be re-used.
Here is a list of the materials that most frequently occur when dismantling:
• Chrome-nickel-steel
• Aluminium
• Copper
• Brass
• Electrical and electronic parts
• PP and other synthetic materials
20

Documentation

Installation drawing / technical sheet
Technical data sheet
Wiring diagram / Programming instructions
Update:2009-12-18 MRL
W e reserve the right to change execution and construction!
40/42
9662798