Environmentally Acceptable Measures, Disposal Of The Installation; Documentation - Meiko UPster H 500 Operating Instructions Manual

Operating Instructions UPster H 500 / H 500S
Maintenance procedures
7. Electrical installation
Check of all fuses
Tighten all electrical connections
Check tank and boiler heating
Check thermostat and stop switch
8. Electrical safety check
Visual inspection
Check the protective conductor
Measure insulation resistance
Protection conductor current measurement
9. Detergent dosing
Check dosage, adjust if necessary
10. Rinse aid dosing
Check dosage, adjust if necessary
11. Function test on the complete machine
Check machine for correct interaction of all functions
12. Test run
Check results of test wash and rinse
Brief instruction for new personnel
9735020
20 Environmentally acceptable measures, Disposal of the
installation
Each end-of-life machine must be immediately disabled - to avoid later accidents.

Switch the machine off completely via the on-site circuit breaker.

Completely empty the appliance's hydraulic system.
When you eventually dispose of the machine (removal/scrapping), its components should
be recycled in line with their materials.
A list of all materials that frequently occur during disassembly follows below:
 Chromium-nickel steel
 Aluminum
 Copper
 Brass
 Electrical and electronic parts
 PP and other plastics
21

Documentation

Installation drawing/standard drawing
Technical data
Wiring diagram/programming instructions
Design and construction subject to change without prior notice!
Page
(certificate is optional)
40 42
of
at least 1 x
year
at least 1 x
year
at least 1 x
year
at least 1 x
year