Environmentally Acceptable Measures, Disposal Of The Installation; Documentation - Meiko EcoStar 430 F-MIKE Operating Instructions Manual

Operating instructions EcoStar 430 F-M
Maintenance procedures
Check dosage, adjust if necessary
10. Operation check of the complete machine
Check machine for correct interaction of all functions
11. Test run
Check results of test wash and rinse
brief instruction for new personnel
Datei:1_EcoStar430F-MIKE_9702129_Betriebsanleitung_EN_2012-07.docx
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
19 Environmentally acceptable measures, Disposal of the
installation
Each discarded appliance is to be made immediately unserviceable - to avoid later acci-
dents.
Switch the machine off completely via the on-site power disconnection device.
When you eventually dispose of the installation (dismantlement/scrapping), the parts and
their corresponding materials should preferably be re-used.
Below a list of all materials arising frequently with a disassembly:
Chromium nickel steel
Aluminum
Copper
Brass
Electrical and electronical parts
PP and other synthetic materials
20

Documentation

Installation drawing / technical sheet
Technical data sheet
Wiring diagram / Programming instructions
Installation regulations - general information
Update:
W e reserv e the right to change execution and construction!
9702129 36/38