Operating Instructions UPster U 400 / U 500 / U 500S
9735077
Maintenance procedures
Check dosage, adjust if necessary
10. Rinse aid dosing
Check dosage, adjust if necessary
11. Operation check of the complete machine
Check machine for correct interaction of all functions
12. Test run
Check results of test wash and rinse
Brief instruction for new personnel
20
Environmentally acceptable measures, disposal of the
installation
Each discarded appliance is to be made immediately unserviceable - to avoid later acci-
dents.
Switch the machine off completely via the on-site power disconnection device.
When you eventually dispose of the machine (removal/scrapping), its components should
be recycled in line with their materials.
A list of all materials that frequently occur during disassembly follows below:
Chromium-nickel steel
Aluminum
Copper
Brass
Electrical and electronic parts
PP and other plastics
21
Documentation
Installation drawing/standard drawing
Technical data
Wiring diagram/programming instructions
Design and construction subject to change without prior notice
Page
42
44
of