Edk Soft Keys Configuration - Yealink VP59 Administrator's Manual

Administrator's Guide for VP59/SIP-T58A/CP960 IP Phones
Devices
Parameter edk.edkprompt.X.userfeedback
It configures the user input feedback method for user input prompt X.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "edk.edkprompt.X.enable" are set to
1 (Enabled).
visible-the entered text is visible.
Permitted
Values
masked-the entered text is displayed as dot characters "
Default visible
Supported
All phones except CP960
Devices
Parameter edk.edkprompt.X.title
It configures the text string used as a title for the user input prompt X. The title appears at the top of the
user input prompt screen.
If it is left blank, the EDK Prompt is displayed.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "edk.edkprompt.X.enable" are set to
1 (Enabled).
Permitted
String
Values
Default EDK Prompt
Supported
All phones except CP960
Devices
[1]
X is the prompt ID. X=1-10.

EDK Soft Keys Configuration

You can customize the soft keys as need. This feature is typically used to access frequently-used functions or to cre-
ate menu shortcuts to frequently-used phone settings.
Custom soft keys can be added in the following phone states:
Idle - There are no active calls on the phone.
l
Alerting (or ringing) – There is an incoming call on the phone.
l
Connecting – There is an outgoing call on the phone. Moreover, the call is connecting.
l
Transfer connecting – There is a call being transferred to another phone. Moreover, the call is connecting.
l
Talk – There is an active call on the phone.
l
Call failed – The outgoing call encounters a failure.
l
Ring back - There is an outgoing call on the phone. Moreover, the phone is in the ringback state.
l
Transfer ring back - There is a call being transferred to another phone. Moreover, the phone is in the ringback
l
state.
Hold – The call is placed on hold on the phone.
l
Held – The call is held.
l
Conference – The phone sets up a conference call.
l
Note
: Configuring the custom soft keys may affect the softkey layout in different call states. For more information on softkey
Softkey Layout
layout, refer to
The following table lists the parameters you can use to configure EDK soft keys.
Parameter softkey.X.enable
246
[1]
[1]
.
[1]
<y0000000000xx>.cfg
.
". It can be used to mask password fields.
<y0000000000xx>.cfg
<y0000000000xx>.cfg