Side Repeater Lamp Bulb; Front Fog Lamp Assembly Rear Cover; Side Repeater Lamp; Side Repeater Lamp Retaining Tabs - Chrysler 2000 LHS Owner's Manual

2000 LHS, 300M, CONCORDE AND INTREPID
LH
REMOVAL AND INSTALLATION (Continued)
Fig. 9 Front Fog Lamp Assembly Rear Cover
1 – FRONT FOG LAMP ASSEMBLY
2 – FRONT FOG LAMP ASSEMBLY REAR COVER
Fig. 10 Front Fog Lamp Bulb
1 – FRONT FOG LAMP ASSEMBLY
2 – FRONT FOG LAMP BULB
Installation
(1) Install bulb into the fog lamp assembly and
reattach the retaining wire.
(2) Cover exposed terminals with protective sleeve.
(3) Install the rear cover on the fog lamp assembly.
(4) Connect the electrical connector and place the
fog lamp assembly into the front bumper fascia.
(5) Install the fog lamp assembly attaching screws.

SIDE REPEATER LAMP BULB

Removal
(1) Insert a small flat screwdriver between the
lamp and the body panel. Disengage the lamp retain-
ing tabs (Fig. 11) (Fig. 12).
Fig. 11 Side Repeater Lamp
1 – SIDE REPEATER LAMP
2 – FENDER
Fig. 12 Side Repeater Lamp Retaining Tabs
1 – RETAINING TABS
2 – REPEATER LAMP
3 – FENDER
LAMPS 8L - 11