Side Repeater Lamp; Tail/Stop, Rear Turn Signal, Tail And Backup Lamp - Chrysler Journey User Manual

Electrical Connector
4. Rotate the bulb and connector assembly
turn counterclockwise and remove it from the
fog lamp housing.
5. Remove the bulb from the connector socket
and install the replacement bulb.
6. Install the bulb and connector assembly into
the fog lamp housing and rotate the connector
1 ⁄ turn clockwise to lock it in place.
4
7. Reinstall the fog lamp housing.

Side Repeater Lamp

The side repeater lamps are located in both
front fender panels.
1. Push the side repeater lens to left side to
release the spring tension and then pull it
outward.
2. Disconnect the bulb from the harness con-
nector and then connect the replacement bulb.
1 ⁄
4
Side Repeater Bulb Removal
3. Engage the right hook of the side repeater
lamp into the sheet metal (note correct orienta-
tion of lettering on lens).
4. Rotate the side repeater lamp in place until
the left side engages (you will hear a light
click).
Tail/Stop, Rear Turn Signal, Tail and
Backup Lamp
The taillamps are a two-piece design. The
tail/stop lamps and rear turn signal lamps are
located in the rear corner body panels. The tail
and backup lamps are located in the liftgate.
253