Front Fog Lamp; Front/Rear Side Marker Lamp; Rear Backup Lamp And Turn Signal Lamps; License Lamp - Chrysler 2016 300 Owner's Manual

Hide thumbs Also See for 2016 300:

Table of Contents

4. Squeeze the two tabs on the side of the bulb socket and

pull straight out from the lamp assembly.

5. Disconnect the bulb from the wiring connector and

install the replacement bulb.

6. Install the bulb and connector assembly straight into

the lamp until it locks in place.

7. Install the turn signal bulb cap in the headlamp

housing and rotate clockwise to lock in place.

Front Fog Lamp

The Front Fog Lamps use LED sources that are not

serviceable separately. The Front Fog Lamp must be

replaced as an assembly, see your authorized dealer.

The Side Markers use LED lamps that are not serviceable

separately. The Side Markers must be replaced as an

assembly, see your authorized dealer.

MAINTAINING YOUR VEHICLE 561

The Rear Backup and Turn Signal Lamp use LED sources

that are not serviceable separately. The Rear Lamps must

be replaced as an assembly, please see your authorized

The License Lamp uses an LED source that is not

serviceable separately. The License Lamp must be re-

placed as an assembly, see your authorized dealer.

The CHMSL Lamp uses LED sources that are not service-

able separately. The CHMSL Lamp must be replaced as

an assembly, see your authorized dealer.

Table of Contents