Submenu Running Time Of The Motor; Submenu Software Status - Hermle Z 326 Service Instruction

7.3.1.3 Submenu running time of the motor:

Here you can read off the operating hours of the motor.
• Activate the operation menu as described in chapter 7.3.1.
• Turn the potentiometer until the special digit „service h" appears in the display „acc/dec".
In the display „rpm/rcf" the running time of the motor is indicated now.

7.3.1.4 Submenu Software status:

Here you can read off the software status.
• Activate the operation menu as described in chapter 7.3.1.
• Turn the potentiometer until the special digit „service S" appears in the display „acc/dec".
In the display „rpm/rcf" the actual software status is indicated now.
Page 13 of 48 SERVICE INSTRUCTION Z 326
7 SERVICE INSTRUCTIONS
© HERMLE Labortechnik GmbH
Version 01/2010