Editing Ils File Settings; Copying Existing Ils File Settings; Deleting An Ils File; Resetting The Lens - Christie CineLife+ CP4415-RGB User Manual

Editing ILS file settings

Edit Intelligent Lens System (ILS) file settings when content requirements change.
1. In the left navigation menu, select Image Settings > ILS File Setup.
2. In the ILS File list, select an ILS file.
3. Modify the ILS file settings.
4. Select Save.

Copying existing ILS file settings

To duplicate Intelligent Lens System (ILS) file settings quickly, copy the settings of an existing file to a
new ILS file.
1. In the left navigation menu, select Image Settings > ILS File Setup.
2. In the ILS File list, select the ILS file you want to copy.
3. Select Save As.
4. Type a name for the ILS file and select Save.

Deleting an ILS file

Delete an Intelligent Lens System (ILS) file when it is no longer required.
1. In the left navigation menu, select Image Settings > ILS File Setup.
2. In the ILS File list, select the ILS file you want to delete.
3. Select Delete.
4. To confirm the deletion, select Delete.

Resetting the lens

Use the Reset Lens feature to have the Intelligent Lens System (ILS) find the home position flags that
allow the ILS to compensate for drift over time, or move to its proper position after it has been
manually adjusted.
1. In the left navigation menu, select Image Settings > ILS File Setup.
2. Select Reset Lens.
3. In the confirmation dialog, select Continue.
CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4435-RGB, CP4440-RGB, CP4450-RGB, CP2420-Xe, CP4420-Xe
020-103073-06 Rev. 1 (03-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Adjusting the image size and position
74