Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 1618

LLDP C
OMMANDS
SHOW LLDP NEIGHBORS DETAIL
Table 44: Parameters in the output of the show lldp neighbors detail command
613-50157-01 Rev C
Parameter
Chassis ID Type
Chassis ID
Port ID Type
Port ID
TTL
Port Description
System Name
System Description
System Capabilities
(Supported)
System Capabilities
(Enabled)
Management Addresses
Port VLAN ID (PVID)
Port & Protocol VLAN
(Supported)
Port & Protocol VLAN
(Enabled)
Port & Protocol VLAN (VIDs)
VLAN Names
Protocol IDs
MAC/PHY Auto-negotiation
Power Via MDI (PoE)
Link Aggregation
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Description
Type of the Chassis ID.
Chassis ID that uniquely identifies the
neighbor.
Type of the Port ID.
Port ID of the neighbor.
Number of seconds that the information
advertised by the neighbor remains valid.
Port description of the neighbor's port.
Neighbor's system name.
Neighbor's system description.
Capabilities that the neighbor supports.
Capabilities that are enabled on the
neighbor.
List of neighbor's management addresses.
VLAN identifier associated with untagged or
priority tagged frames for the neighbor port.
Whether Port & Protocol VLAN is supported
on the LLDP neighbor.
Whether Port & Protocol VLAN is enabled on
the LLDP neighbor.
List of Port & Protocol VLAN identifiers.
List of names of VLANs that the neighbor's
port belongs to.
List of protocols that are accessible through
the neighbor's port.
Auto-negotiation configuration and status
PoE configuration and status of 802.3 Power-
Via-MDI TLV
Link aggregation information
1618