Check Region-Configuration - HP A5830 Series Command Reference Manual

Syntax
bpdu-drop any
undo bpdu-drop any
View
Ethernet interface view
Default level
2: System level
Parameters
None
Example
# Enable BPDU drop on port GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] bpdu-drop any

check region-configuration

Description
Use the check region-configuration command to display MST region pre-configuration information,
including the region name, revision level, and VLAN-to-instance mapping settings.
Two or more spanning tree devices belong to the same MST region only if they are configured with the
same format selector (0 by default, not configurable), MST region name, MST region revision level, and
the same VLAN-to-instance mapping entries in the MST region, and if they are connected via a physical
link.
HP recommends that you use this command to determine whether the MST region configurations to be
activated are correct. Activate them only when they are correct.
Related commands: instance, region-name, revision-level, vlan-mapping modulo, and active region-
configuration.
Syntax
check region-configuration
View
MST region view
Default level
2: System level
Parameters
None
Example
# Display MST region pre-configurations.
89