Mac-Address Information Interval - HP A5830 Series Command Reference Manual
Layer 2 - lan switching
Hide thumbs
Also See for A5830 Series:
- Configuration manual (280 pages) ,
- Configuration manual (207 pages) ,
- Configuration manual (152 pages)
Table of Contents
Advertisement
Syntax
mac-address information enable
undo mac-address information enable
View
System view
Default level
2: System level
Parameters
None
Example
# Enable MAC Information globally.
<Sysname> system-view
[Sysname] mac-address information enable
mac-address information interval
Description
Use the mac-address information interval command to set the interval for sending Syslog or trap
messages.
Use the undo mac-address information interval command to restore the default interval for sending
Syslog or trap messages.
By default, the interval for sending Syslog or trap messages is 1 second.
Syntax
mac-address information interval value
undo mac-address information interval
View
System view
Default level
2: System level
Parameter
value: Sets the interval for sending Syslog or trap messages, in the range of 1 to 20,000 seconds.
Example
# Set the interval for sending Syslog or trap messages to 200 seconds.
<Sysname> system-view
[Sysname] mac-address information interval 200
59
Advertisement
Table of Contents
