HP A5830 Series Command Reference Manual page 199

Syntax
display gvrp state interface interface-type interface-number vlan vlan-id [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
0: Visit level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vlan vlan-id: Specifies a VLAN ID, ranging from 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Example
# Display GVRP state machines in VLAN 2 on port GigabitEthernet 1/0/1.
<Sysname> display gvrp state interface gigabitethernet 1/0/1 vlan 2
GVRP state of VLAN 2 on port GigabitEthernet1/0/1
Table 42 Command output
Field
GVRP state of VLAN 2 on port
GigabitEthernet1/0/1
Applicant state machine
Applicant state machine
Registrar state machine
: VP
: MTR
Description
Information about the GVRP state machines in VLAN 2 on
port GigabitEthernet 1/0/1
Applicant state machine handles attribute declarations. Its
state can be VA, AA, QA, LA, VP, AP, QP, VO, AO, QO,
LO, VON, AON, and QON. Each state consists of two or
three letters with the following meanings:
The first letter indicates the state: V for Very anxious, A for
Anxious, Q for Quiet, and L for Leaving.
The second letter indicates the membership state: A for
Active member, P for Passive member, and O for
Observer.
The third letter N (if any) stands for Non-participant.
For example, VP indicates ―Very anxious, Passive
member".
192