HP A5830 Series Command Reference Manual page 79

Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Example
# Display the summary information for all aggregation groups.
<Sysname> display link-aggregation summary
Aggregation Interface Type:
BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG
Interface
-------------------------------------------------------------------------
BAGG1
BAGG10
Table 19 Command output
Field
Aggregation Interface Type
Aggregation Mode
Loadsharing Type
Actor System ID
AGG Interface
AGG Mode
Partner ID
Select Ports
Unselect Ports
AGG Partner ID
Mode
S none
D 0x8000, 000f-e267-57ad
Select Unselect
Ports
1
2
Description
Aggregate interface type:
BAGG—Layer 2 aggregate interface
RAGG—Layer 3 aggregate interface
Aggregation group type:
S—Static link aggregation
D—Dynamic aggregation
Load sharing type:
Shar—Load sharing
NonS—Non-load sharing
Local system ID, which comprises the system LACP priority and the
system MAC address
Type and number of the aggregate interface
Aggregation group type
System ID of the partner, which comprises the system LACP
priority and the system MAC address
Total number of Selected ports
Total number of Unselected ports
72
Share
Ports Type
0 Shar
0 Shar