Link-Aggregation Load-Sharing Mode Local-First - HP A5830 Series Command Reference Manual

destination-mac: Performs load sharing in link aggregation groups based on destination MAC address.
destination-port: Performs load sharing in link aggregation groups based on destination port.
ingress-port: Performs load sharing in link aggregation groups based on ingress port.
source-ip: Performs load sharing in link aggregation groups based on source IP address.
source-mac: Performs load sharing in link aggregation groups based on source MAC address.
source-port: Performs load sharing in link aggregation groups based on source port.
Examples
# Configure the destination MAC address as the global link-aggregation load sharing criterion.
<Sysname> system-view
[Sysname] link-aggregation load-sharing mode destination-mac
# Configure the destination MAC address as the load sharing criterion specific to the link aggregation
group of aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation load-sharing mode destination-mac

link-aggregation load-sharing mode local-first

Description
Use the link-aggregation load-sharing mode local-first command to enable local-first load sharing for link
aggregation.
Use the undo link-aggregation load-sharing mode local-first command to disable local-first load sharing
for link aggregation.
By default, local-first load sharing is enabled for link aggregation.
Syntax
link-aggregation load-sharing mode local-first
undo link-aggregation load-sharing mode local-first
View
System view
Default level
2: System level
Parameters
None
Example
# Disable local-first load sharing for link aggregation.
<Sysname> system-view
[Sysname] undo link-aggregation load-sharing mode local-first
80