Stp Bpdu-Protection; Stp Bridge-Diameter - HP A5830 Series Command Reference Manual

View
MST region view
Default level
2: System level
Parameter
level: Specifies an MSTP revision level, in the range of 0 to 65,535.
Example
# Set the MSTP revision level of the MST region to 5.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] revision-level 5

stp bpdu-protection

Description
Use the stp bpdu-protection command to enable the BPDU guard function.
Use the undo stp bpdu-protection command to disable the BPDU guard function.
By default, the BPDU guard function is disabled.
Syntax
stp bpdu-protection
undo stp bpdu-protection
View
System view
Default level
2: System level
Parameters
None
Example
# Enable the BPDU guard function.
<Sysname> system-view
[Sysname] stp bpdu-protection

stp bridge-diameter

Description
Use the stp bridge-diameter command to specify the network diameter, the maximum possible number of
stations between any two terminal devices on the switched network.
Use the undo stp bridge-diameter command to restore the default.
114