Display Port Combo; Duplex - HP A5830 Series Command Reference Manual

For the description of some fields in the output, see

display port combo

Description
Use the display port combo command to display the combo interfaces of the switch and the fiber and
copper combo ports.
Syntax
display port combo [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Example
# Display the combo interfaces of the switch and the fiber and copper combo ports.
<Sysname> display port combo
Combo-group
1
2
Table 9 Command output
Field
Combo-group
Active
Inactive
In a combo interface, the fiber or copper combo port with the smaller port number is active by default.
You can determine whether a port is a fiber combo port or a copper combo port by checking the ―Media
type is‖ field of the display interface command.

duplex

Description
Use the duplex command to set the duplex mode for an Ethernet interface.
Active
GigabitEthernet1/0/47
GigabitEthernet1/0/48
Description
Combo interfaces of the switch, represented by combo interface numbers that are
generated by the system
Ports of the combo interfaces that are active
Ports of the combo interfaces that are inactive
Table 8.
Inactive
GigabitEthernet1/0/49
GigabitEthernet1/0/50
16