HP A5830 Series Command Reference Manual page 15

Layer 2 - lan switching
Hide thumbs Also See for A5830 Series:
Table of Contents

Advertisement

PVID: 1
Mdi type: auto
Port link-type: access
Tagged
VLAN ID : none
Untagged VLAN ID : 1
Port priority: 0
Last clearing of counters:
Peak value of input: 0 bytes/sec, at 2011-05-28 10:02:36
Peak value of output: 0 bytes/sec, at 2011-05-28 10:02:36
Last 300 seconds input:
Last 300 seconds output:
Input (total):
0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Input (normal):
0 packets, - bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Input:
0 input errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 frame, - overruns, 0 aborts
- ignored, - parity errors
Output (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output (normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, - no carrier
Table 4 display interface command (in bridge mode) output description
Field
GigabitEthernet1/0/1 current state
IP Packet Frame Type
Hardware address
Description
Loopback is not set
Unknown-speed mode
unknown-duplex mode
Link speed type is autonegotiation
link duplex type is autonegotiation
The Maximum Frame Length
Broadcast MAX-ratio
Unicast MAX-ratio
Never
0 packets/sec 0 bytes/sec -%
0 packets/sec 0 bytes/sec -%
Description
Physical state of the Ethernet interface. For more information, see
Table
5.
Ethernet framing format on the interface.
Hardware address of the port.
Description of the interface.
Loopback testing function is disabled.
Port speed is unknown.
Duplex mode is unknown.
Interface will negotiate a speed with its peer.
Interface will negotiate a duplex mode with its peer.
Maximum Ethernet frame length allowed on the interface.
Broadcast suppression threshold as a percentage of the interface
transmission capability. When the threshold is exceeded, the
interface drops broadcast packets.
Unknown unicast suppression threshold as a percentage of the
interface transmission capability. When the threshold is exceeded,
the interface drops unknown unicast packets.
8

Advertisement

Table of Contents
loading

Table of Contents