Introduction; Manufacturer's Liability; Customer's Responsibility - Vatech Green 21 PCT-90LH User Manual

1.

Introduction

1.1

Manufacturer's Liability

As the manufacturer, VATECH assumes liability for the safe and reliable installation
and operation of this equipment only when:
Equipment installation, including software installation, was conducted by an

authorized agent in accordance with this installation manual.
Electrical installation was conducted in accordance with the appropriate

requirements specified in IEC-60363.
Genuine original or approved replacement parts are used.

Maintenance/repair service has been performed by a qualified technician(s) from

one of our authorized agents.
The equipment has been used under a normal condition in accordance with the

user's manual.
1.2

Customer's Responsibility

Site planning and preparation are the responsibility of the customer. The following
points should be considered fundamentally important to all customers of this product:
Install all required materials prior to delivery of the system.

Complete checking of the room's floor and ceiling before installing the equipment.

Install proper sized junction boxes, with covers, at the necessary locations.

Install a mains power with the proper voltage output and an adequate rating.

Install the circuit breaker specified by this manual.

Provide the installer(s) with the current dimensions of the room including the

hallway and entry door sizes.
Green21 (Model: PCT-90LH) Installation Manual
Introduction
3