Manufacturer's Liability; Owner And Operator's Obligations - Vatech PaX-i3D User Manual

1 General Information
1 General Information
1.1
1.2
12

Manufacturer's Liability

The manufacturers and/or retailers of this equipment assume responsibility for
the safe and normal operation of this product only when:
■ The equipment has been installed by a VATECH authorized technician.
■ The equipment has been installed in accordance with all of the cautions and
conditions for installation.
■ Genuine VATECH approved equipment and components have been used
at all times.
■ All maintenance and repairs have been performed by a VATECH authorized
agent.
■ The equipment has been used normally in accordance with the user's
manual.
■ The equipment damage or malfunction is not the result of an error on the
part of the owner or operator.

Owner and Operator's Obligations

■ The owner of this equipment shall perform constancy tests at regular intervals in
order to ensure patient and operator safety. These tests must be performed in
accordance with local X-ray safety regulations.
■ The owner of this equipment shall perform regular inspection and maintenance of
the mechanical and electrical components in this equipment to ensure safe and
consistent operation (IEC 60601-1). The owner of this equipment shall ensure
inspection and cleaning works are performed in accordance with the maintenance
schedule outlined in Chapter 10 Cleaning and Maintenance.
PaX-i3D Green (PHT-60CFO) User Manual