Samson 5824 Mounting And Operating Instructions page 56

Configuration and operation using TROVIS-VIEW
Perform reset
The actuator is restarted.
Load default settings
The configuration is reset to the default setting.
Start zero calibration
The actuator moves to the end position (stem extended). After the zero calibration is complet-
ed, the transit time is adopted and the actuator is ready for operation. The actuator stem is
moved to the position determined by the input signal.
Start transit time measurement
Measures the time required to move from one end position to the other.
Long-term test/Basic settings
Î For after-sales service only
56 EB 5824-2 EN