9.8.3
Service/Functions
Manual level
The actuator can be switched to the manual mode using the TROVIS-VIEW software if the
manual level is enabled in online mode. The actuator leaves the manual mode as soon as
you exit the manual level or the online mode in TROVIS-VIEW.
The following actions are possible in the manual level:
− Retract actuator stem: ON/OFF
− Extend actuator stem: ON/OFF
− Move stem to standardized posi-
tioning value: ON/OFF
First enter the required positioning
value in relation to the input signal
range (standardized positioning
value).
− Issue standardized position feed-
back: ON/OFF
First enter the required position
feedback in relation to the span of
the position feedback signal (stan-
dardized position feedback).
− Issue error message: ON/OFF
− Yellow LED: ON/OFF
− Red LED: ON/OFF
EB 5824-2 EN
Configuration and operation using TROVIS-VIEW
55