Transfer data
10.1 Data transmission between TROVIS-VIEW and the actuator
(connecting cable)
Note
Data transmission is only possible after electrical connection (see section 5.3) and when the
actuator is ready to run.
1. Connect the serial port of the computer us-
ing the connecting cable to the serial inter-
face of the actuator.
2. Select Communication ... from the Options
menu to open the Communication win-
dow. Click Server settings.
3. Check Local connection radio button. Click
OK. The Communication window reap-
pears.
4. Click Connection settings.
5. In the Automatic detection field (Status: not
yet detected), click Start. TROVIS-VIEW
has found the device when the status
changes (Device found on COM ....). Click
OK twice to confirm settings.
62
EB 5824-2 EN