Servicing; Preparation For Return Shipment - Samson 5824 Mounting And Operating Instructions

11 Servicing

Note
The electric actuator was checked by
SAMSON before it left the factory.
− The product warranty becomes void if ser-
vice or repair work not described in these
instructions is performed without prior
agreement by SAMSON's After-sales Ser-
vice department.
− Only use original spare parts by
SAMSON, which comply with the original
specifications.
11.1 Preparation for return ship-
ment
Defective actuators can be returned to
SAMSON for repair.
Proceed as follows to return devices to
SAMSON:
1. Put the control valve out of operation and
remove it from the pipeline. See associat-
ed valve documentation.
2. Remove the electric actuator from the
valve (see section 13.2).
3. Send the electric actuator to your nearest
SAMSON subsidiary. SAMSON subsid-
iaries are listed on our website at
u www.samson.de > Contact.
EB 5824-2 EN
Servicing
71