Ipv6 Prefer Temporary-Address; Ipv6 Unreachables Enable - HP A5120 EI Series Command Reference Manual

Hide thumbs Also See for A5120 EI Series:
Table of Contents

Advertisement

ipv6 prefer temporary-address

Syntax
ipv6 prefer temporary-address [ valid-lifetime preferred-lifetime ]
undo ipv6 prefer temporary-address
View
System view
Default level
2: System level
Parameters
valid-lifetime: Specifies the valid lifetime of temporary IPv6 addresses in seconds, in the range 600 to
4,294,967,295. The default valid lifetime is 604,800 seconds, that is, seven days.
preferred-lifetime: Specifies the preferred lifetime of temporary IPv6 addresses in seconds, in the range
600 to 4,294,967,295. The default valid lifetime is 86,400 seconds, that is, one day.
Description
Use the ipv6 prefer temporary-address command to configure the system to generate and preferably use
the temporary IPv6 address of the sending interface as the source address of the packet to be sent.
Use the undo ipv6 prefer temporary-address command to disable the system from generating temporary
IPv6 addresses and remove existing temporary IPv6 addresses.
By default, the system does not generate or use any temporary IPv6 address.
You need to configure the valid lifetime greater than or equal to the preferred lifetime.
You need to enable stateless address autoconfiguration before configuring this function.
The preferred lifetime of a temporary IPv6 address takes the value of the preferred lifetime of the address
prefix, or the value of the preferred lifetime you configure for temporary IPv6 addresses minus
DESYNC_FACTOR (which is a random number ranging 0 to 600, in seconds), whichever is smaller.
The valid lifetime of a temporary IPv6 address takes the value of the valid lifetime of the address prefix, or
the value of the valid lifetime you configure for temporary IPv6 addresses, whichever is smaller.
Examples
# Configure the system to generate and preferably use the temporary IPv6 address of the sending
interface as the source address of the packet to be sent.
<Sysname> system-view
[Sysname] ipv6 prefer temporary-address

ipv6 unreachables enable

Syntax
ipv6 unreachables enable
undo ipv6 unreachables
View
System view
175

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents