Ipv6 - HP A5120 EI Series Command Reference Manual

shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 0
Table 41 Output description
Field
Total
checksum error
shorter than header
data length larger than packet
unicast(no socket on port)
broadcast/multicast(no socket on port)
not delivered, input socket full
input packet missing pcb cache

ipv6

Syntax
ipv6
undo ipv6
View
System view
Default level
2: System level
Parameters
None
Description
Use the ipv6 command to enable IPv6.
Use the undo ipv6 command to disable IPv6.
By default, IPv6 is disabled.
Examples
# Enable IPv6.
Description
Total number of received/sent packets
Total number of packets with a checksum error
Total number of IPv6 UDP packets whose total length is less
than that specified by the packet header
Total number of packets whose data length exceeds that
specified by the packet header
Total number of received unicast packets without any socket
Total number of received broadcast/multicast packets without
any socket
Number of packets not handled because of the receive buffer
being full
Number of packets failing to match the protocol control block
(PCB) cache
156