Dhcp Relay Information Circuit-Id String; Dhcp Relay Information Enable - HP A5120 EI Series Command Reference Manual

dhcp relay information circuit-id string

Syntax
dhcp relay information circuit-id string circuit-id
undo dhcp relay information circuit-id string
View
Interface view
Default level
2: System level
Parameters
circuit-id: Specifies the padding content for the user-defined circuit ID sub-option, a case-sensitive string of
3 to 63 characters.
Description
Use the dhcp relay information circuit-id string command to configure the padding content for the user-
defined circuit ID sub-option.
Use the undo dhcp relay information circuit-id string command to restore the default.
By default, the padding content for the circuit ID sub-option depends on the padding format of Option
82.
After you configure the padding content for the circuit ID sub-option using this command, ASCII is
adopted as the code type.
Related commands: dhcp relay information format and display dhcp relay information.
Examples
# Configure the padding content for the circuit ID sub-option as company001.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] dhcp relay information circuit-id string company001

dhcp relay information enable

Syntax
dhcp relay information enable
undo dhcp relay information enable
View
Interface view
Default level
2: System level
Parameters
None
54