Bootfile-Name; Dhcp Enable - HP A5120 EI Series Command Reference Manual

bootfile-name

Syntax
bootfile-name bootfile-name
undo bootfile-name
View
DHCP address pool view
Default level
2: System level
Parameters
bootfile-name: Specifies the boot file name, a string of 1 to 63 characters.
Description
Use the bootfile-name command to specify a bootfile name in the DHCP address pool for the client.
Use the undo bootfile-name command to remove the specified bootfile name.
By default, no bootfile name is specified.
If you execute the bootfile-name command repeatedly, the latest configuration will overwrite the previous
one.
Related commands: dhcp server ip-pool and display dhcp server tree.
Examples
# Specify the bootfile name aaa.cfg in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] bootfile-name aaa.cfg

dhcp enable

Syntax
dhcp enable
undo dhcp enable
View
System view
Default level
2: System level
Parameters
None
Description
Use the dhcp enable command to enable DHCP.
Use the undo dhcp enable command to disable DHCP.
By default, DHCP is disabled.
20