Network; Network Ip Range - HP A5120 EI Series Command Reference Manual

[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] netbios-type b-node

network

Syntax
network network-address [ mask-length | mask mask ]
undo network
View
DHCP address pool view
Default level
2: System level
Parameters
network-address: Specifies the IP address range for dynamic allocation. If no mask length and mask is
specified, the natural mask will be used.
mask-length: Specifies the mask length, in the range 1 to 30.
mask mask: Specifies the IP address network mask, in dotted decimal format.
Description
Use the network command to specify the IP address range for dynamic allocation in a DHCP address
pool.
Use the undo network command to remove the specified address range.
No IP address range is specified by default.
You can specify only one network segment for each common address pool. If you use the network
command repeatedly, the latest configuration will overwrite the previous one.
Related commands: dhcp server ip-pool and display dhcp server tree.
Examples
# Specify 192.168.8.0/24 as the address range for dynamic allocation in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] network 192.168.8.0 mask 255.255.255.0

network ip range

Syntax
network ip range min-address max-address
undo network ip range
View
DHCP address pool view
Default level
2: System level
41