HP A5120 EI Series Command Reference Manual page 151

all: Displays information of all neighbors, including neighbors acquired dynamically and configured
statically.
dynamic: Displays information of all neighbors acquired dynamically.
static: Displays information of all neighbors configured statically.
slot slot-number: Displays information of the neighbors of a specified device in an IRF. If no IRF is formed,
the neighbors of only the current device are displayed. The slot-number argument indicates the member ID
of the device.
If the switch does not support IRF, the slot-number argument must be 1.
interface interface-type interface-number: Displays information of the neighbors of a specified interface.
vlan vlan-id: Displays information of the neighbors of a specified VLAN whose ID ranges from 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipv6 neighbors command to display neighbor information.
You can use the reset ipv6 neighbors command to clear specific IPv6 neighbor information.
Related commands: ipv6 neighbor, reset ipv6 neighbors.
Examples
# Display all neighbor information.
<Sysname> display ipv6 neighbors all
IPv6 Address
FE80::200:5EFF:FE32:B800
Table 35 Output description
Field
IPv6 Address
Link-layer
VID
Interface
Type: S-Static D-Dynamic
Link-layer
0000-5e32-b800
Description
IPv6 address of a neighbor
Link layer address (MAC address) of a neighbor
VLAN to which the interface connected with a neighbor belongs
Interface connected with a neighbor
VID Interface State
N/A GE1/0/1
143
T Age
REACH S -