Bootp Client Configuration Commands; Display Bootp Client - HP A5120 EI Series Command Reference Manual

BOOTP client configuration commands

NOTE:

BOOTP client configuration can only be used on VLAN interfaces.

If several VLAN interfaces sharing the same MAC address obtain IP addresses through a BOOTP relay agent,
the BOOTP server cannot be a Windows Server 2000 or Windows Server 2003.

display bootp client

Syntax
display bootp client [ interface interface-type interface-number ] [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the BOOTP client information of the interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display bootp client command to display related information about a BOOTP client.
If interface interface-type interface-number is not specified, the command will display information about
BOOTP clients on all interfaces.
If interface interface-type interface-number is specified, the command will display information about the
BOOTP client on the specified interface.
Examples
# Display related information of the BOOTP client on VLAN-interface 1.
<Sysname> display bootp client interface vlan-interface 1
Vlan-interface1 BOOTP client information:
Allocated IP: 169.254.0.2 255.255.0.0
Transaction ID = 0x3d8a7431
Mac Address 00e0-fc0a-c3ef
93