Dhcp Server Ip-Pool; Dhcp Server Ping Packets - HP A5120 EI Series Command Reference Manual

Using the dhcp server forbidden-ip command repeatedly can exclude multiple IP address ranges from
allocation.
Related commands: display dhcp server forbidden-ip, dhcp server ip-pool, network, and static-bind ip-
address.
Examples
# Exclude the IP address range 10.1 10.1.1 to 10.1 10.1.63 from dynamic allocation.
<Sysname> system-view
[Sysname] dhcp server forbidden-ip 10.110.1.1 10.110.1.63

dhcp server ip-pool

Syntax
dhcp server ip-pool pool-name [ extended ]
undo dhcp server ip-pool pool-name
View
System view
Default level
2: System level
Parameters
pool-name: Specifies the global address pool name, which is a unique pool identifier, a string of 1 to 35
characters.
extended: Specifies the address pool as an extended address pool. If this keyword is not specified, the
address pool is a common address pool.
Description
Use the dhcp server ip-pool command to create a DHCP address pool and enter its view. If the pool was
created, you will directly enter its view.
Use the undo dhcp server ip-pool command to remove the specified DHCP address pool.
By default, no DHCP address pool is created.
Related commands: dhcp enable and display dhcp server tree.
Examples
# Create the common address pool identified by 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0]

dhcp server ping packets

Syntax
dhcp server ping packets number
undo dhcp server ping packets
24