Irdp Configuration Commands; Ip Irdp; Ip Irdp Address - HP A5120 EI Series Command Reference Manual

IRDP configuration commands

ip irdp

Syntax
ip irdp
undo ip irdp
View
Interface view
Default level
2: System level
Parameters
None
Description
Use the ip irdp command to enable IRDP on an interface.
Use the undo ip irdp command to disable IRDP on an interface.
IRDP is disabled on an interface by default.
IRDP configuration takes effect only when IRDP is enabled.
Examples
# Enable IRDP on VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ip irdp

ip irdp address

Syntax
ip irdp address ip-address preference
undo ip irdp address ip-address
View
Interface view
Default level
2: System level
Parameters
ip-address: Specifies the proxy-advertised IP address.
preference: Specifies the preference of the proxy-advertised IP address, in the range -2,147,483,648 to
2,147,483,647.
127