HP 12500 Series Configuration Manual page 362

To do...
Enable the IPv6 IS-IS process on the
interface
NOTE:
For more information about IPv6 IS-IS, see
Configuring eBGP between MCE and VPN site
To use eBGP for exchanging routing information between an MCE and IPv6 VPN sites, you must
configure a BGP peer for each IPv6 VPN instance on the MCE, and redistribute the IGP routes of each
VPN instance on the IPv6 VPN sites.
If eBGP is used for route exchange, you also can configure filtering policies to filter the received routes
and the routes to be advertised.
Configure the MCE
1.
To configure the MCE:
To do...
Enter system view
Enter BGP view
Enter IPv6 BGP-VPN instance view
Specify an IPv6 BGP peer in an AS
Redistribute remote site routes
advertised by the PE
Configure a filtering policy to filter
the routes to be advertised
Configure a filtering policy to filter
the received routes
NOTE:
After you configure an IPv6 BGP VPN instance, the IPv6 BGP route exchange for the IPv6 VPN instance is
the same with the normal IPv6 BGP VPN route exchange. For more information about IPv6 BGP, see
3—IP Routing Configuration Guide
Configure a VPN site
2.
To configure the VPN site:
To do...
Enter system view
Enter BGP view
Use the command...
isis ipv6 enable [ process-id ]
Layer 3—IP Routing Configuration Guide
Use the command...
system-view
bgp as-number
ipv6-family vpn-instance
vpn-instance-name
peer ipv6-address as-number
as-number
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
filter-policy { acl6-number |
ipv6-prefix ip-prefix-name } export
[ direct | isisv6 process-id | ripng
process-id | static ]
filter-policy { acl6-number |
ipv6-prefix ip-prefix-name } import
.
Use the command...
system-view
bgp as-number
354
Remarks
Required
Disabled by default
.
Remarks
—
—
Required
Required
Required
By default, No route redistribution
is configured.
Optional
By default, the MCE does not filter
the routes to be advertised.
Optional
By default, the MCE does not filter
the received routes.
Remarks
—
—
Layer