HP 12500 Series Configuration Manual page 234

To do...
Enter BGP view
Configure the remote PE as the
peer
Specify the interface for TCP
connection
Enter BGP-VPNv4 subaddress
family view
Set the default value of the local
preference
Set the default value for the system
MED
Filter all or certain types of routes to
be advertised
Filter received routes
Advertise community attributes to a
peer or peer group
Filter routes received from or to be
advertised to a peer or peer group
based on an AS_PATH list
Advertise a default VPN route to a
peer or peer group
Apply a filtering policy to a peer or
peer group
Apply a route filtering policy based
on IP prefix list to a peer or peer
group
Specify not to change the next hop
of a route when advertising it to an
eBGP peer
Specify the preference value for the
routes received from the peer or
peer group
Use the command...
bgp as-number
peer ip-address as-number
as-number
peer ip-address connect-interface
interface-type interface-number
ipv4-family vpnv4
default local-preference value
default med med-value
filter-policy { acl-number |
ip-prefix ip-prefix-name } export
[ direct | isis process-id | ospf
process-id | rip process-id | static ]
filter-policy { acl-number |
ip-prefix ip-prefix-name } import
peer { group-name | ip-address }
advertise-community
peer { group-name | ip-address }
as-path-acl aspath-filter-number
{ import | export }
peer { group-name | ip-address }
default-route-advertise
vpn-instance vpn-instance-name
peer { group-name | ip-address }
filter-policy acl-number { export |
import }
peer { group-name | ip-address }
ip-prefix prefix-name { export |
import }
peer { group-name | ip-address }
next-hop-invariable
peer { group-name | ip-address }
preferred-value value
226
Remarks
—
Required
Required
—
Optional
100 by default
Optional
By default, the default value of the
system MED is 0.
Optional
By default, BGP does not filter
routes to be advertised.
Optional
By default, BGP does not filter
received routes.
Optional
By default, no community attributes
are advertised to any peer or peer
group.
Optional
By default, no AS filtering list is
applied to a peer or peer group.
Optional
By default, no default VPN route is
advertised to a peer or peer group.
Optional
By default, no filtering policy is
applied to a peer or peer group.
Optional
By default, no route filtering policy
based on IP prefix list is applied to
a peer or peer group.
Optional
By default, a device uses its
address as the next hop when
advertising a route to its eBGP
peer.
Optional
0 by default