HP 12500 Series Configuration Manual page 233

Mpls, routing switch series
Table of Contents

Advertisement

To do...
Configure the system to use the
local address as the next hop of a
route to be advertised to a specific
peer or peer group
Configure the system to be the RR
and set a peer or peer group as the
client of the RR
Enable the Outbound Route
Filtering (ORF) capability for a BGP
peer or peer group
Enable VPN target filtering for
received VPNv4 routes
Enable route reflection between
clients
Specify the cluster ID of the RR
Create an RR reflection policy
NOTE:
For information about VPLS address family, see
Configuring specific routing features for BGP-VPNv4 subaddress family
To configure specific routing features for BGP-VPNv4 subaddress family:
To do...
Enter system view
Use the command...
peer { group-name | ip-address }
next-hop-local
peer { group-name | ip-address }
reflect-client
peer { group-name | ip-address }
capability-advertise orf ip-prefix
{ both | receive | send }
policy vpn-target
reflect between-clients
reflector cluster-id { cluster-id |
ip-address }
rr-filter
extended-community-list-number
MPLS Command Reference
Use the command...
system-view
225
Remarks
Optional
By default, the system uses the local
address as the next hop of a route
to be advertised to an eBGP peer.
In the inter-AS option C solution,
you must configure the peer
{ group-name | ip-address }
next-hop-invariable command on
the RR for multi-hop eBGP
neighbors and reflector clients to
make sure that the next hop of a
VPN route will not be changed.
Optional
By default, no RR or RR client is
configured.
Optional
By default, the ORF capability is
disabled on a BGP peer or peer
group.
Optional
Enabled by default
Optional
Enabled by default
Optional
Router ID of an RR in the cluster by
default
Optional
By default, an RR does not filter the
reflected routes.
With an RR reflection policy, only
iBGP routes whose Extended
Communities attribute matches the
specified one are reflected.
By configuring different RR
reflection policies on different RRs,
you can implement load balancing
among the RRs.
.
Remarks

Advertisement

Table of Contents
loading

Table of Contents