HP 12500 Series Configuration Manual page 91

[SwitchC] isis 1
[SwitchC-isis-1] network-entity 00.0005.0000.0000.0003.00
[SwitchC-isis-1] quit
[SwitchC] interface vlan-interface 2
[SwitchC-Vlan-interface2] isis enable 1
[SwitchC-Vlan-interface2] quit
[SwitchC] interface loopback 0
[SwitchC-LoopBack0] isis enable 1
[SwitchC-LoopBack0] quit
Perform the display ip routing-table command on each switch. The output shows that all nodes
have learned the host routes of other nodes with LSR IDs as destinations. Take Switch A for
example:
[SwitchA] display ip routing-table
Routing Tables: Public
Destinations : 8
Destination/Mask
1.1.1.1/32
2.1.1.0/24
2.1.1.1/32
2.2.2.2/32
3.2.1.0/24
3.3.3.3/32
127.0.0.0/8
127.0.0.1/32
Configure MPLS TE basic settings.
3.
# Configure Switch A.
[SwitchA] mpls lsr-id 1.1.1.1
[SwitchA] mpls
[SwitchA-mpls] mpls te
[SwitchA-mpls] quit
[SwitchA] interface vlan-interface 1
[SwitchA-Vlan-interface1] mpls
[SwitchA-Vlan-interface1] mpls te
[SwitchA-Vlan-interface1] quit
# Configure Switch B.
[SwitchB] mpls lsr-id 2.2.2.2
[SwitchB] mpls
[SwitchB-mpls] mpls te
[SwitchB-mpls] quit
[SwitchB] interface vlan-interface 1
[SwitchB-Vlan-interface1] mpls
[SwitchB-Vlan-interface1] mpls te
[SwitchB-Vlan-interface1] quit
[SwitchB] interface vlan-interface 2
[SwitchB-Vlan-interface2] mpls
[SwitchB-Vlan-interface2] mpls te
[SwitchB-Vlan-interface2] quit
Routes : 8
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
ISIS 15 10
ISIS 15 20
ISIS 15 20
Direct 0 0
Direct 0 0
83
NextHop Interface
127.0.0.1 InLoop0
2.1.1.1 Vlan1
127.0.0.1 InLoop0
2.1.1.2 Vlan1
2.1.1.2 Vlan1
2.1.1.2 Vlan1
127.0.0.1 InLoop0
127.0.0.1 InLoop0