HP 12500 Series Configuration Manual page 12

Mpls, routing switch series
Table of Contents

Advertisement

As shown in
A downstream LSR classifies FECs according to destination addresses. It assigns a label to a FEC, and
distributes the FEC-label binding to its upstream LSR, which then establishes an LFIB entry for the FEC
according to the binding information. After all LSRs along the packet forwarding path establish a LFIB
entry for the FEC, an LSP is established for packets of this FEC.
Figure 4 Process of dynamic LSP establishment
Ingress
LSR A
LSR E
Label distribution and management
An LSR informs its upstream LSRs of labels assigned to FECs through label advertisement. The label
advertisement modes include downstream unsolicited (DU) and downstream on demand (DoD). The
label distribution control modes include independent and ordered.
Label management specifies the mode for processing a received label binding that is not useful at the
moment. The processing mode, called "label retention mode," can be either liberal or conservative.
Label advertisement modes
Figure 5 Label advertisement modes
Figure
4, a dynamic LSP is established in the following procedure:
LSR B
LSR F
Egress
LSR C
LSR D
LSR G
LSR H
4
Label mapping
LSP

Advertisement

Table of Contents
loading

Table of Contents