HP 12500 Series Configuration Manual page 69

To do...
Enable retransmission
Enable summary refresh
Configuring the RSVP hello extension
To configure the RSVP hello extension:
To do...
Enter system view
Enter MPLS view
Enable global RSVP hello
extension
Configure the maximum number of
consecutive hellos that should be
lost before the link is considered
failed.
Configure the hello interval
Exit to system view
Enter interface view of MPLS TE link
Enable interface RSVP hello
extension
NOTE:
RSVP hello extension detects the reachability of RSVP neighboring nodes. It is defined in RFC 3209.
Configuring RSVP-TE resource reservation confirmation
To configure RSVP-TE resource reservation confirmation:
To do...
Enter system view
Enter MPLS view
Enable resource reservation
confirmation
Use the command...
mpls rsvp-te timer retransmission
{ increment-value
[ increment-value ] |
retransmit-value
[ retrans-timer-value ] } *
mpls rsvp-te srefresh
Use the command...
system-view
mpls
mpls rsvp-te hello
mpls rsvp-te hello-lost times
mpls rsvp-te timer hello timevalue
quit
interface interface-type
interface-number
mpls rsvp-te hello
Use the command...
system-view
mpls
mpls rsvp-te resvconfirm
61
Remarks
Optional
Disabled by default
Optional
Disabled by default
Remarks
––
––
Required
Disabled by default
Optional
By default, the link is considered
failed if three consecutive hellos
are lost.
Optional
The default is 3 seconds.
––
––
Required
Disabled by default
Remarks
––
––
Required
Disabled by default