HP 12500 Series Configuration Manual page 354

To do...
Create an IPv6 IS-IS process for a
VPN instance and enter IS-IS view
Configure a network entity title for
the IS-IS process
Enable the IPv6 capacity for the
IS-IS process
Return to system view
Enter interface view
Enable the IPv6 capacity for the
IS-IS process on the interface
NOTE:
For more information about IPv6 IS-IS, see
Configuring eBGP between PE and CE
Configure the PE
1.
To configure eBGP between PE and CE:
To do...
Enter system view
Enable BGP and enter BGP view
Enter IPv6 BGP-VPN instance view
Configure the CE as the VPN eBGP
peer
Redistribute the routes of the local
CEs
Configure a filtering policy to filter
the routes to be advertised
Configure a filtering policy to filter
received routes
Configure the CE
2.
To configure eBGP between PE and CE:
Use the command...
isis [ process-id ] vpn-instance
vpn-instance-name
network-entity net
ipv6 enable
quit
interface interface-type
interface-number
isis ipv6 enable [ process-id ]
Layer 3—IP Routing Configuration Guide
Use the command...
system-view
bgp as-number
ipv6-family vpn-instance
vpn-instance-name
peer ipv6-address as-number
as-number
import-route protocol [ process-id ]
[ med med-value | route-policy
route-policy-name ] *
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ direct | isisv6 process-id |
ripng process-id | static ]
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
import
346
Remarks
Required
Perform this configuration on PEs.
On CEs, create a normal IPv6 IS-IS
process.
Required
Not configured by default
Required
Disabled by default
—
—
Required
Disabled by default
.
Remarks
—
—
Required
Required
Required
A PE needs to redistribute the
routes of the local CEs into its VPN
routing table so that it can
advertise them to the peer PE.
Optional
By default, BGP does not filter
routes to be advertised.
Optional
By default, the PE does not filter
received routes.