HP 12500 Series Configuration Manual page 118
Mpls, routing switch series
Hide thumbs
Also See for 12500 Series:
- Configuration manual (338 pages) ,
- Network management and monitoring command reference (320 pages) ,
- Command reference manual (157 pages)
Table of Contents
Advertisement
[SwitchB-explicit-path-by-path] next hop 3.3.3.3
[SwitchB-explicit-path-by-path] quit
# Create the bypass tunnel.
[SwitchB] interface tunnel 5
[SwitchB-Tunnel5] ip address 11.1.1.1 255.255.255.0
[SwitchB-Tunnel5] tunnel-protocol mpls te
[SwitchB-Tunnel5] destination 3.3.3.3
[SwitchB-Tunnel5] mpls te tunnel-id 15
[SwitchB-Tunnel5] mpls te path explicit-path by-path preference 1
# Configure the bandwidth that the bypass tunnel protects.
[SwitchB-Tunnel5] mpls te backup bandwidth 10000
[SwitchB-Tunnel5] mpls te commit
[SwitchB-Tunnel5] quit
# Bind the bypass tunnel with the protected interface.
[SwitchB] interface Vlan-interface 2
[SwitchB-Vlan-interface2] mpls te fast-reroute bypass-tunnel tunnel 5
[SwitchB-Vlan-interface2] quit
Perform the display interface tunnel command on Switch B. You can see that Tunnel5 is up.
Perform the display mpls lsp command on each switch. You can see that two LSPs are traversing
Switch B and Switch C.
[SwitchA] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC
4.4.4.4/32
[SwitchB] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC
In/Out Label
4.4.4.4/32
1024/1024
3.3.3.3/32
NULL/1024
[SwitchC] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC
In/Out Label
4.4.4.4/32
1024/3
3.3.3.3/32
3/NULL
[SwitchD] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC
In/Out Label
4.4.4.4/32
3/NULL
[SwitchE] display mpls lsp
In/Out Label
In/Out IF
NULL/1024
-/Vlan1
In/Out IF
Vlan1/Vlan2
-/Vla4
In/Out IF
Vlan2/Vlan3
Vlan5/-
In/Out IF
Vlan3/-
110
Vrf Name
Vrf Name
Vrf Name
Vrf Name
Advertisement
Table of Contents
Troubleshooting
